Metal Roof and Wall Panel Fabrication

When a visitor enters your home, the first thing they will probably notice are your walls and ceiling. For a bigger “wow factor,” consider using metal wall and ceiling panels. This will give you the look you want, as well as the dry, cozy and homey interior that you need. Antebellum Roofworks Co Inc fabricates three distinct fabrication styles to fit any need.

Standing Seam Metal (Architectural and Structural)

Mechanical Lock

The traditional standing seam roof system used for centuries all over the world is the mechanical lock roof system. It is considered the best metal roof system available because it is the perfect choice for both low and steep slope roof in any residential, historical or commercial application. It is a concealed fastener panel that is installed with clips and locked together by bending the seams 90 degrees for a single lock or 180 degrees for a double lock.

Snap Lock

The snap lock panel is a concealed fastener standing seam roof system. It combines both the look and advantages of traditional standing seam with panel while lowering both labor and equipment costs. It is attached to the roof deck using metal clips and snapped together at the seams. Proven successes during high wind and extreme weather situations make it highly popular in residential, historical and commercial projects.

Nailstrip

The nailstrip panel is another concealed fastener standing seam roof system. Combining the concealed fastener roof system advantages with the ease of application similar to many through fastened roof panels, it is formed with light gauge steel or aluminum. The panel is fastened to the roof deck without clips and is the residential economy choice product in the standing seam line.

Batten Cap

The batten cap is a traditional standing seam panel that enhances the appearance of both asphalt shingle and metal panel combinations. It is designed to suit the needs of the residential roofing market and is easy to install compared to other standing seam roof systems. However, its design is also suited for ‘Mansard’ roofs, common in commercial construction.

Flush Wall Panels

The flush wall panel is an interlocking wall-to-soffit panel used in a wide range of commercial and industrial applications, where there is very high demand for a seamless field-fabricated panel.

Custom Panels

Are you looking for curved or tapered panels for that impressive architectural look? Antebellum Roofworks Co Inc can form other custom panels in a convex manner. We can curve standard width panels or tapered panels into shapes that are ideal for round dormers and vaulted roof presentations.

Through Fastened/Screw Down Metal

5V Crimp

An attractive and economical roof panel, perfect for both the agricultural and residential markets, the 5V crimp profile is an older metal roofing profile that can be successfully utilized on historical products.

R Panel

Both attractive and economical, this is a newer, more industrial-looking panel for the agricultural and residential roofing markets and the metal-building market. Its affordable installation and material costs make it a leading economy choice in metal roofing.

Soffit (Both Perforated and Nonperforated)

Flush Wall Panel

This panel is an interlocking wall-to-soffit panel utilized in a wide range of commercial and industrial applications. It is attached and installed in a sequential pattern after being roll-formed and will give your wall a flat finish.

Nashville Roof and Wall Panel Experts

No matter the purpose you are especially shopping for, the look you are trying to attain or the market you are involved in, Antebellum Roofworks Co Inc is the best choice for all of your roof and wall panel needs. With more than 20 years of experience, we can create the perfect panels for you. Contact us at (615) 794-9111 today or fill out our form for a quote or to get started.

Roofing          Storm Damage           Gutters           Sheet Metal           Service           Contact

5.06